Featured
Edelbrock 1406 Running Rich
Edelbrock 1406 Running Rich. Joined feb 13, 2012 messages 40 loc. It is installed on a bone stock 305 and is sitting.
I checked float level and set it per the manual before installation. 13.4 to 14.0 is running properly = not rich. From the smell and the look of the plugs after cruise speeds.
10 Equipped Center Section And He Is One Happy.
1406 has a cfm rating of 600 for giving you sufficient airflow in the engine. Just put my motor together and my carb is running very rich. Previous owner installed a edelbrock 1406.
I Have A 600 Edelbrock 1406 I Bought Used And Have Had On For About 4 Years.
If you are running rich all around, you'll need to get metering rods that step up on both sizes to lean it out, say a 75/49 for example. This 1406 is my first edelbrock, and it went on my brand new 383. 302 + edelbrock 1406 jetting.
My 1406 Which Came On The 1968 Mustang 302 I Bought Was Running Rich At Idle.
Edelbrock 1406 running rich runandgun contributor posts 410: I was running 9.5 in power mode and 10.5 at cruise. For awhile now, it's been loading up,running.
Joined Feb 13, 2012 Messages 40 Loc.
I think i washed out a cylinder or multiple after my sniper efi install i have a dodge ramcharger, an 84 with a 74 dodge dart 318 motor in it post: Carb is about 2 years old with 500 miles on it. Start date nov 30, 2017;
Accelerator Pump Is Full Rich (From Above), Some Think They're Running Rich, So They Opt For A Leaner Tune And It Gets Worse.
Vintage engines , with non efficient designs. 13.4 to 14.0 is running properly = not rich. Long story short, this is the wrong direction.
Popular Posts
Legionella Flushing How Long To Run Taps
- Get link
- X
- Other Apps
Comments
Post a Comment